Home > Product Introduction >Electronic/Chemical Parts 
 
 
: IH-401 is an EVA based hot melt adhesive designed for stick glue gun application.
Main use • Hot melt adhesive for stick glue gun applicator.
General
characteristics
• Good workabilityl
• Good initial and final adhesionl
• Good heat resistancel
• Good tack
Properties • Appearancel : Solid
• Colorl : White
• Solid contentsl : 100%
• Viscosityl : Approx 14,000 2,500 cps @180
                              17,300 2,500 cps @160
• Softening pointl : Approx 82 5
• Lbs/gallonl : 8.0
• Packaging : 12 Stick
Method • Hot melt adhesive for stick glue gun applicator. Well balance in both adhesion and cohesion strength. Good adhesion and high viscosity & temperature performance.
• Suggested running temperature : 140 180
• Can be used on all conventional hot melt wheel, nozzle, slot, spiral spray, melt-blown, and control coat applicators.
Cautions • Material is applied hot - appropriate clothing and eye protection should be used.
• Use adequate ventilation to remove any hot melt fumes or vapors that are generated..
• Rotate stock - first in, first out.
 
: IS-118 is a polyurethane based product designed to give excellent bonding strength, initial cohesive force and high heat-resistance properties for Aluminum profile wrapping woodworking.
Main use • Aluminum Profile Wrapping Adhesive.
• High performance grade for wrapping Application.
Characteristics • Good workability.
• Excellent bonding Strength for Aluminum to Deco-sheet.
• Very good Hot tack.
Chemical Properties • Appearance : Milky transparent liquid
• Solid Content : 242 %
• Viscosity : 15,000+/- 3000 cps @30
• Mix ratio : 20 :1(Hardener :IS-382)weight ratio
• Hardener : IS-382
• APHA : 300 below
• Period of Q.A : For 6 months from the date manufacture.
Related Products • PVC Wrapping Adhesive : IS-119N
• MDF Wrapping Adhesive: IS-120
How to use • Mixing of the hardener. Add 5 parts of hardener IS-382 to 100parts of IS-118 and sufficiently stir. The mixed product should be used up within 4hours after preparation.(Pot life is 8 hours.)
• Coating of the adhesive. Coat evenly thick with knife coater or reverse coater. Coating weight is 0.1+/- 0.02mm
• Press : after the enforced drying while still warm, instantaneously heat further to 60~80, then remove the air from between the sheet and core with a roller(linear pressure:1~6 kg/)and press together.
• Post processing: simple operations like sheet cutting can be done soon after the roll press.
Caution for use • Provide ventilation where the adhesive is used. Also to avoid direct contact with skin and body use rubber gloves, apron etc.
• There may be sheets and materials this product is not adequate for. Accordingly, before applying it at the plant, use it after careful examination.
• Do not store the adhesive at low temperature below 0
• Be careful not to mix in damp and moisture.
• Rotate the lots so as not to store for a long time.
 
: IS-119N is a polyurethane based solvent bone product designed to give excellent bonding strength, initial cohesive force and high heat-resistance properties for PVC Frame to PVC profile wrapping woodworking.
Main use • Aluminum Profile Wrapping Adhesive.
• High performance grade for wrapping Application.
Characteristics • Good workability.
• Excellent bonding Strength for Aluminum to Deco-sheet.
• Very good Hot tack.
Chemical Properties • Appearance : Milky transparent liquid
• Solid Content : 332 %
• Viscosity : 9,000+/- 2000 cps @25
• Mix ratio : 15 :1(Hardener :IS-383)weight ratio
• Hardener : IS-384
• APHA : 300 below
• Period of Q.A : For 6 months from the date manufacture.
Related Products • PVC Wrapping Adhesive : IS-119N
• MDF Wrapping Adhesive: IS-120
How to use • Mixing of the hardener. Add 6~8 parts of hardener IS-384 to 100parts of IS-119N and sufficiently stir. The mixed product should be used up within 4hours after preparation.(Pot life is 8 hours.)
• Coating of the adhesive. Coat evenly thick with knife coater or reverse coater. Coating weight is 0.1+/- 0.02mm
• Press : after the enforced drying while still warm, instantaneously heat further to 60~80, then remove the air from between the sheet and core with a roller(linear pressure:1~6 kg/)and press together.
• Post processing: simple operations like sheet cutting can be done soon after the roll press.
Caution for use • Provide ventilation where the adhesive is used. Also to avoid direct contact with skin and body use rubber gloves, apron etc.
• There may be sheets and materials this product is not adequate for. Accordingly, before applying it at the plant, use it after careful examination.
• Do not store the adhesive at low temperature below 0
• Be careful not to mix in damp and moisture.
• Rotate the lots so as not to store for a long time.
 
: IS-120 is a polyurethane based solvent bone product designed to give excellent bonding strength, initial cohesive force and high heat-resistance properties for MDF, Lauan to PVC profile wrapping woodworking.
Main use • MDF, Lauan Profile Wrapping Adhesi
• High performance grade for wood wrapping Application.
Characteristics • Good workability.
• Excellent bonding Strength for MDF & Lauan to Deco-sheet.
• Good heat resistance.
Chemical Properties • Appearance : Light Amber transparent liquid
• Solid Content : 252 %
• Viscosity : 8,000+/- 2000 cps @25
• Mix ratio : 15 :1(Hardener :IS-383weight ratio)
• Hardener : IS-383N
• APHA : 300 below
• Period of Q.A : For 6 months from the date manufacture.
Related Products • Aluminum wrapping Adhesive : IS-118
• PVC Wrapping Adhesive: IS-119N
How to use • Mixing of the hardener. Add 6~8 parts of hardener IS-383N to 100parts of IS-120 and sufficiently stir. The mixed product should be used up within 4hours after preparation.(Pot life is 8 hours.)
• Coating of the adhesive. Coat evenly thick with knife coater or reverse coater. Coating weight is 0.1+/- 0.02mm
• Press : after the enforced drying while still warm, instantaneously heat further to 60~80, then remove the air from between the sheet and core with a roller(linear pressure:1~6 kg/)and press together.
• Post processing: simple operations like sheet cutting can be done soon after the roll press.
Caution for use • Provide ventilation where the adhesive is used. Also to avoid direct contact with skin and body use rubber gloves, apron etc.
• There may be sheets and materials this product is not adequate for. Accordingly, before applying it at the plant, use it after careful examination.
• Do not store the adhesive at low temperature below 0
• Be careful not to mix in damp and moisture.
• Rotate the lots so as not to store for a long time.